Application Settings (Map)

With this feature...	Do this...
Background Color	Select the color to display as an underlay for the map.
Inspect Highlight	Select the color to highlight objects in the inspected layer when the cursor hovers over them. The default color is Medium Violet Red - RGB (199, 21, 133).
Selected Highlight	Select the color to highlight objects that are selected when you click or sweep an area. The default color is specific to AccuMap - RGB (0, 102, 204).
Selected from DataCard	Select the color to highlight objects on the map that are selected in the navigation pane of the DataCard. The default color is Light Salmon - RGB (255, 160, 122).
Posting Scale Cutoff	Type the scale at which posted items no longer appear on the map.
Wellbore Scale Cutoff	Type the desired depth below which directional wellbores are no longer displayed on the map. In order for directional wellbores to appear on the map at all, the Show Wellbore check box must be selected in the Layer Properties pane of the Layer Legend when the Wells layer is selected. The current scale cutoff for the wellbores appears in the Wellbore pane too.
Formation Color Map Scale Cutoff	Type the desired depth below which the formation color map no longer appears on the map. This setting must be set lower than the Wellbore Scale Cutoff.
Directional Survey Data	Select whether to use proprietary or system directional surveys (or some hierarchical combination) throughout AccuMap. Typically, the best selection is System else User so that your proprietary directional survey is visible up until it is officially submitted to the regulator and included in their database, at which point the official directional survey appears instead. Where you are not licensed for directional surveys, this option does not appear on the dialog box.
Enable Mouse Wheel Zooming	Select whether the wheel control on your mouse zooms the map where rolling the wheel forward zooms in and rolling it backwards zooms out.

Background Color

Select the color to display as an underlay for the map.

Inspect Highlight

Select the color to highlight objects in the inspected layer when the cursor hovers over them. The default color is Medium Violet Red - RGB (199, 21, 133).

Selected Highlight

Select the color to highlight objects that are selected when you click or sweep an area. The default color is specific to AccuMap - RGB (0, 102, 204).

Selected from DataCard

Select the color to highlight objects on the map that are selected in the navigation pane of the DataCard. The default color is Light Salmon - RGB (255, 160, 122).

Posting Scale Cutoff

Type the scale at which posted items no longer appear on the map.

Wellbore Scale Cutoff

Type the desired depth below which directional wellbores are no longer displayed on the map. In order for directional wellbores to appear on the map at all, the Show Wellbore check box must be selected in the Layer Properties pane of the Layer Legend when the Wells layer is selected. The current scale cutoff for the wellbores appears in the Wellbore pane too.

Formation Color Map Scale Cutoff

Type the desired depth below which the formation color map no longer appears on the map. This setting must be set lower than the Wellbore Scale Cutoff.

Directional Survey Data

Select whether to use proprietary or system directional surveys (or some hierarchical combination) throughout AccuMap. Typically, the best selection is System else User so that your proprietary directional survey is visible up until it is officially submitted to the regulator and included in their database, at which point the official directional survey appears instead.
Where you are not licensed for directional surveys, this option does not appear on the dialog box.

Enable Mouse Wheel Zooming

Select whether the wheel control on your mouse zooms the map where rolling the wheel forward zooms in and rolling it backwards zooms out.